Cartongum includes a range of pre-coupled plasterboard panels with a polymer based GUMACUSTIK sound insulating membrane, coated on both sides with non-woven fabric. Specially designed to be applied to walls and ceilings with a drywall metal structure or with appropriate profiles for the soundproofing of existing buildings. Cartongum can also be used in cavities with limited available space.

CartonRubber is a plasterboard panel pre-coupled with a layer of high density conglomerated rubber granules. Specially designed to be applied to walls and ceilings with a drywall metal structure or with appropriate profiles for the soundproofing of existing buildings. CartonRubber can also be used in cavities with limited available space.

Plasterboard panel pre-coupled with a layer of conglomerated polyurethane. Specially designed to be applied to walls and ceilings with a drywall metal structure or with appropriate profiles for the soundproofing of existing buildings. CartonPur can also be used in cavities with limited available space.

Gumacustik is an acoustic insulation panel in low-thickness insulation consisting of a polymer based membrane, coated on both sides with non-woven fabric. This product's high flexibility and greatly reduced thickness make it extremely versatile, as an acoustic insulation applied to walls, ceilings or even coupled to plasterboard or other insulation.

Geogum L M is a high-performance thermal and acoustic insulation panel. The panel consists of mineral wool fibres, bonded with thermosetting resins, coupled with an acoustic polymer bitumen membrane. The combination of these two components allows for a very high acoustic performance, thanks to the sound-absorbing properties of the mineral wool and the massspring behaviour of the flexible but high areic mass membrane.

The ROLL line includes a range of low thickness acoustic insulation solutions in rolls, consisting of two layers of cross-linked polyethylene foam with an enclosed floating pure single fusion virgin lead foil. The ROLL line includes a range of subfloor acoustic insulation solutions with a sound absorbant function for airborne noise, thanks to a lead foil, and a subflooring function provided by the elasticity of the cross-linked polyethylene. The high flexibility and greatly reduced thickness of these products make them extremely versatile for other uses such as acoustic insulation for water drains, pipes, industrial machinery, etc.

Tubacustik Installations is a low thickness acoustic insulation solution in a roll, consisting of two layers of crosslinked polyethylene foam enclosing a floating pure single fusion virgin lead foil. Tubacustik Installations is an acoustic insulation solution for sewage pipes with a sound absorbant function for airborne noise, thanks to a lead foil, and separating function provided by the elasticity of cross-linked polyethylene.

Phonopav 100 Base Plus is a low thickness acoustic insulation solution in rolls, consisting of a membrane coupled to an acoustic insulation pad with an elevated sound absorbing power. The upper surface is finished with a thermo-reflective aluminised polyethylene plastic film which, in addition to responding to the practical need of rendering the surface waterproof, also facilitates heat reflection by radiation towards heated environments. The application of this finish provides best results in combination with radiating panels for floor heating. Phonopav 100 Base Plus is used as an under floor insulation solution for impact noise.

Soft Phonopav 300 is a high performance resilient subflooring acoustic insulation solution consisting of a layer of cross-linked closed cell polyethylene foam coupled on the underside with a specially designed needle-punched polyester pad. The polyester pad improves resilience and provides effective protection against puncturing in case of imperfections in the surface.

Phonopav Base consists of a cross-linked closed cell polyethylene foam. This product provides high performance acoustic and thermal insulation characteristics, maintaining its performance over time.

Phonopav 600 EPDM Eco is a low thickness acoustic insulation solution supplied in rolls, consisting of a layer of cross-linked polyethylene foam coupled with a soundproof membrane with a high ECO EPDM mass. Phonopav 600 EPDM Eco is an underfloor acoustic insulation solution with a soundproof function for airborne noise, thanks to an ECO EPDM membrane and impact function provided by the elasticity of the cross-linked polyethylene.

Ecorubber Panel is a panel made of recycled rubber granules, factory-produced using polyurethane resins agglomeration process with subsequent exfoliation. Used as in-wall acoustic insulation of airborne noise in all those horizontal or inclined partitions with little areic mass; also effective for application in wooden or steel roofs for the improvement of the soundproofing power.

RubberRoll is a subflooring cover obtained by an agglomeration of high density vulcanised rubber granules from recycled vehicle tires. RubberRoll is used as a subflooring acoustic insulation laid under the screed to create "floating floors." RubberRoll is suitable for applications on wood floating floors.

Phonopav disjunctor is a rubber granulate element with special features designed to separate building structures in order to limit the transmission of noise through solids. Phonopav disjunctor is laid dry under the partitions for the total width of the masonry.

Phonopav perimeter is a cross-lonked thermo-moulded polyethylene corner element specially designed to achieve a perfect continuity between a sound deadening floor and masonry. The product is fully self-adhesive to ensure fastening to both the subflooring and wall, preventing the floor laying screed from coming into contact with the structures.

Special adhesive tape for sealing overlapping of impact sound insulation products.

Calpestina Grip Acustic is a ready-to-use product based on elastomeric materials from recovery, specific resin binders and additives. It is designed to create desolidarizing layers for the absorption of impact noise due to foot traffic, where a versatile material is required, in total adherence, continuous, without joints or creation of acoustic bridges. Its characteristics make it particularly indicated in the junctions wall-floor, before the screed, to create the bathtub effect, on stairs and condominium corridors to be tiled.

Ventilated roof ECO is a prefabricated panel for the construction of ventilated roofs, made from sintered blockcut polystyrene insulating material with a 40 mm built-in ventilation chamber; the roof covering support consists of a wooden OSB panel.

Ventilated roof ECO Graphite is a prefabricated panel for the construction of ventilated roofs, made from sintered block-cut polystyrene insulating material treated with graphite, with a 40 mm built-in ventilation chamber; the roof covering support consists of a wooden OSB panel.

ROLL EPS is an insulating system in rolls, made up of strips of insulating material, combined and coupled by heat on a bituminous waterproofing membrane. ROLL EPS are made of Expanded Sintered Polystyrene (EPS), with high thermal insulation, closed cell, self-extinguishing RF class E, in compliance with the requirements of European Directive 89/106/ECC and are produced considering and applying the EN 13163 product standards with the CE marking.

PANEL EPS is an insulating system in panels, put together and heat joined to a bituminous waterproof membrane. PANEL EPS are made of Expanded Sintered Polystyrene (EPS), with high thermal insulation, closed cell, self-extinguishing RF class E, in compliance with the requirements of European Directive 89/106/ECC and are produced considering and applying the EN 13163 product standards with the CE marking.

ROLL BLACK is an insulating system in rolls, made up of strips of insulating material, combined and coupled by heat on a bituminous waterproofing membrane. ROLL BLACK are made of thermal insulation EPS panel with graphite additive, with very high thermal insulation capacity, closed-cell, self-extinguishing class E, in compliance with the requirements of European Directive 89/106/ECC and produced considering and applying the EN 13163 product standards, with the CE marking.

PANEL BLACK is an insulating system in panels, put together and heat joined to a bituminous waterproof membrane. PANEL BLACK are made of thermal insulation EPS panel with graphite additive, with high thermal insulation capacity, closed-cell, self-extinguishing class E, in compliance with the requirements of European Directive 89/106/ECC and produced considering and applying the EN 13163 product standards, with the CE marking.

ROLL XPS is an insulating system in rolls, made up of strips of insulating material, combined and coupled by heat on a bituminous waterproofing membrane. ROLL XPS are made of extruded polystyrene (XPS), closed cell, self-extinguishing RF class E, in compliance with the requirements of European Directive 89/106/ECC and are produced considering and applying the EN 13164 product standards with the CE marking.

PANEL XPS is an insulating system in panels, put together and heat joined to a bituminous waterproof membrane. PANEL XPS are made of extruded polystyrene (XPS), closed cell, self-extinguishing RF class E, in compliance with the requirements of European Directive 89/106/ECC and are produced considering and applying the EN 13164 product standards with the CE marking.

PANEL PUR is an insulating system in panels, put together and heat joined to a bituminous waterproof membrane. PANEL PUR are made from closed cell rigid polyiso foam, protected with covering of multi-layer gas A-Cell®

ROCK WOOL PANEL is an insulating system in panels, put together and heat joined to a bituminous waterproof membrane. ROCK WOOL PANEL are made with preformed slabs of rock wool with semi-oriented high density fibers, treated with thermosetting incombustible resins.

ONDUL EPS is a thermal insulating system in panels, made up of flame retardant expanded sintered polystyrene, pre-shaped in the lower part, according to the various shapes of the fiber cement slabs; the flat top is covered with a polymer-bitumen waterproof membrane.

CORRUGATED EPS is a thermal insulating system in panels, consisting of flame retardant expanded sintered polystyrene, pre-shaped in the lower part, according to the various shapes in corrugated sheet; the flat upper part is covered with a waterproofing bitumen polymer membrane.

Thermal insulating panel made from rigid polyiso foam, with closed cells, expanded between two supports: on the upper face in bituminous glass fiber and on the lower face in mineralized saturated glass fiber.

Thermal insulating panel made of a rigid polyiso foam, with closed cells, expanded between two multilayer metallized paper supports.

Thermal insulating yellow panel, consisting of rigid foam of extruded polystyrene with a smooth surface (with extrusion skin). The product is CFC and HCFC free. The side edges may be straight, hinged on four sides, interlocking M/F on two or on all four sides.